Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023PROMASTER 3500 VAN CARGO EXTENDEDREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXDTC INDEX (1 OF 2)MODULE, ANTILOCK BRAKE (ABS)
2023 Dodge and Ram ProMaster 3500 Van Cargo Extended
Module, Antilock Brake (Abs)
2023 Dodge and Ram ProMaster 3500 Van Cargo ExtendedSECTION Module, Antilock Brake (Abs)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| C0010-01 | LEFT FRONT INLET VALVE-GENERAL ELECTRICAL FAILURE |
| C0011-01 | LEFT FRONT OUTLET VALVE - GENERAL ELECTRICAL FAILURE |
| C0014-01 | RIGHT FRONT INLET VALVE - GENERAL ELECTRICAL FAILURE |
| C0015-01 | RIGHT FRONT OUTLET VALVE - GENERAL ELECTRICAL FAILURE |
| C0018-01 | LEFT REAR INLET VALVE - GENERAL ELECTRICAL FAILURE |
| C0019-01 | LEFT REAR OUTLET VALVE - GENERAL ELECTRICAL FAILURE |
| C001C-01 | RIGHT REAR INLET VALVE - GENERAL ELECTRICAL FAILURE |
| C001D-01 | RIGHT REAR OUTLET VALVE - GENERAL ELECTRICAL FAILURE |
| C0020-49 | RECIRCULATION PUMP - INTERNAL ELECTRONIC FAILURE |
| C0030-29 | LEFT FRONT TONE WHEEL - INVALID SIGNAL |
| C0031-01 | LEFT FRONT SPEED SENSOR - GENERAL ELECTRICAL FAILURE |
| C0031-29 | LEFT FRONT SPEED SENSOR - INVALID SIGNAL |
| C0031-4A | LEFT FRONT WHEEL SPEED SENSOR - INCORRECT COMPONENT INSTALLED |
| C0033-29 | RIGHT FRONT TONE WHEEL - INVALID SIGNAL |
| C0034-01 | RIGHT FRONT SPEED SENSOR - GENERAL ELECTRICAL FAILURE |
| C0034-29 | RIGHT FRONT SPEED SENSOR - INVALID SIGNAL |
| C0034-4A | RIGHT FRONT WHEEL SPEED SENSOR - INCORRECT COMPONENT INSTALLED |
| C0036-29 | LEFT REAR TONE WHEEL - INVALID SIGNAL |
| C0037-01 | LEFT REAR SPEED SENSOR - GENERAL ELECTRICAL FAILURE |
| C0037-29 | LEFT REAR SPEED SENSOR - INVALID SIGNAL |
| C0037-4A | LEFT REAR WHEEL SPEED SENSOR - INCORRECT COMPONENT INSTALLED |
| C0039-29 | RIGHT REAR TONE WHEEL - INVALID SIGNAL |
| C003A-01 | RIGHT REAR SPEED SENSOR - GENERAL ELECTRICAL FAILURE |
| C003A-29 | RIGHT REAR SPEED SENSOR - INVALID SIGNAL |
| C003A-4A | RIGHT REAR WHEEL SPEED SENSOR - INCORRECT COMPONENT INSTALLED |
| C003A-95 | SPEED SENSOR REAR RIGHT - INCORRECT ASSEMBLY |
| C003B-02 | WHEEL SPEED INTERFERENCE - GENERAL SIGNAL FAILURE |
| C003B-29 | WHEEL SPEED COMPARATIVE - INVALID SIGNAL |
| C003B-64 | WHEEL SPEED INTERFERENCE - SIGNAL PLAUSIBILITY FAILURE |
| C003C-19 | SPEED SENSOR BACKWARD SUPPLY - CIRCUIT CURRENT ABOVE THRESHOLD |
| C0047-01 | BRAKE PRESSURE SENSOR - GENERAL ELECTRICAL FAILURE |
| C0047-29 | BRAKE PRESSURE SENSOR - INVALID SIGNAL |
| C0051-29 | STEERING ANGLE SENSOR (EPS) - INVALID SIGNAL |
| C0051-54 | STEERING ANGLE SENSOR (EPS) - MISSING CONFIGURED |
| C0051-86 | STEERING ANGLE SENSOR (EPS) - BUS SIGNAL INVALID |
| C0061-29 | LATERAL ACCELERATION SENSOR - INVALID SIGNAL |
| C0061-86 | LATERAL ACCELERATION SENSOR IN AIRBAG SYSTEM - SIGNAL INVALID |
| C0062-29 | LONGITUDINAL ACCELERATION SENSOR - INVALID SIGNAL |
| C0062-86 | LONGITUDINAL ACCELERATION SENSOR IN AIRBAG SYSTEM - SIGNAL INVALID |
| C0063-29 | YAW RATE SENSOR - INVALID SIGNAL |
| C0063-49 | YAW RATE SENSOR - INTERNAL ELECTRONIC FAILURE |
| C0063-86 | YAW RATE SENSOR IN AIRBAG SYSTEM - SIGNAL INVALID |
| C006A-29 | MULTI-AXIS ACCELERATION SENSOR - SIGNAL INVALID |
| C006A-49 | MULTI-AXIS ACCELERATION SENSOR - INTERNAL ELECTRONIC FAILURE |
| C006A-4B | MULTI-AXIS ACCELERATION SENSOR - OVER TEMPERATURE |
| C006A-54 | MULTI-AXIS ACCELERATION SENSOR - MISSING CALIBRATION |
| C006C-4A | MULTI AXIS ACCELERATION SENSOR IN AIRBAG SYSTEM MISMATCH - INCORRECT COMPONENT INSTALLED |
| C0211-49 | ECU CAN BUS - INTERNAL ELECTRONIC FAILURE |
| C1000-94 | SOFTWARE COMPONENT ANTI-LOCK BRAKE SYSTEM (ABS) - UNEXPECTED OPERATION |
| C1001-94 | SOFTWARE COMPONENT ELECTRONIC STABILITY PROGRAM (ESP) - UNEXPECTED OPERATION |
| C1115-16 | VALVE SUPPLY VOLTAGE - BELOW THRESHOLD |
| C1120-54 | WHEEL SPEED SENSOR TYPE TEST ROUTINE - MISSING CALIBRATION |
| C1200-16 | BATTERY VOLTAGE - BELOW THRESHOLD |
| C1200-17 | BATTERY VOLTAGE - ABOVE THRESHOLD |
| C1200-1C | BATTERY VOLTAGE - CIRCUIT VOLTAGE OUT OF RANGE |
| C1201-16 | BATTERY VOLTAGE ELECTRIC PARK BRAKE - CIRCUIT VOLTAGE BELOW THRESHOLD |
| C1201-17 | BATTERY VOLTAGE ELECTRIC PARK BRAKE - CIRCUIT VOLTAGE ABOVE THRESHOLD |
| C1205-01 | VALVE RELAY - GENERAL ELECTRICAL FAILURE |
| C1205-49 | VALVE RELAY - INTERNAL ELECTRONIC FAILURE |
| C1206-01 | PRIMING VALVE 1 - GENERAL ELECTRICAL FAILURE |
| C1207-01 | PRIMING VALVE 2 - GENERAL ELECTRICAL FAILURE |
| C1208-01 | PILOT VALVE 1 - GENERAL ELECTRICAL FAILURE |
| C1209-01 | PILOT VALVE 2 - GENERAL ELECTRICAL FAILURE |
| C120A-24 | ESC SWITCH - SIGNAL STUCK HIGH |
| C1210-86 | ABS/ESC LAMP COMMUNICATION - INVALID SIGNAL |
| C1211-49 | ABS MODULE - INTERNAL ELECTRONIC FAILURE |
| C1211-96 | ABS MODULE - COMPONENT INTERNAL FAILURE |
| C1212-04 | CONTROL UNIT EPB SECTION - SYSTEM INTERNAL FAILURE |
| C1212-49 | CONTROL UNIT EPB SECTION - INTERNAL ELECTRONIC FAILURE |
| C1212-55 | VARIANT CODING - NOT CONFIGURED |
| C1213-54 | EOL MISSING CALIBRATION |
| C1213-55 | END OF LINE (EOL) CONFIGURATION - NOT CONFIGURED |
| C1214-55 | ECU NEVER CONFIGURED - NOT CONFIGURED |
| C1215-02 | BRAKE LIGHT SWITCH - GENERAL SIGNAL FAILURE |
| C1215-24 | BRAKE SWITCH - STUCK HIGH |
| C1215-29 | BRAKE LIGHT SWITCH - INVALID SIGNAL |
| C1217-23 | REVERSE GEAR SWITCH - ACTUATOR STUCK LOW |
| C1217-24 | REVERSE GEAR SWITCH - ACTUATOR STUCK HIGH |
| C1218-4B | VALVES ACTUATED TOO LONG BY TESTER - OVER TEMPERATURE |
| C1219-16 | PUMP SUPPLY VOLTAGE - BELOW THRESHOLD |
| C1220-95 | WHEEL SPEED SENSORS SWAPPED - INCORRECT ASSEMBLY |
| C1221-86 | PCM BUS SIGNAL INVALID |
| C1222-29 | VEHICLE SPEED CALCULATION FAULT - SIGNAL INVALID |
| C1223-68 | BRAKE BOOST FAIL FROM ECM - EVENT INFORMATION |
| C1223-87 | ENGINE 15 MESSAGE - MISSING MESSAGE |
| C1227-87 | STATUSC ECM2 MESSAGE FROM ENGINE CONTROL MODULE - MISSING MESSAGE |
| C1228-64 | HARDWIRED VACUUM SENSOR PLAUSIBILITY INFORMATION - SIGNAL PLAUSIBILITY FAILURE |
| C1230-64 | CAN VACUUM SENSOR PLAUSIBILITY INFORMATION - SIGNAL PLAUSIBILITY FAILURE |
| C1230-68 | VACUUM SENSOR PLAUSIBILTY INFORMATION - EVENT INFORMATION |
| C1240-86 | AUTOMATIC/ROBOTIC GEAR BOX SIGNAL FAULT - SIGNAL INVALID |
| C1315-86 | HILL DESCENT CONTROL (HDC) COMMAND PLAUSIBILITY - SIGNAL INVALID |
| C1400-01 | ELECTRIC PARK BRAKE SWITCH - GENERAL ELECTRICAL FAILURE |
| C1400-13 | ELECTRIC PARK BRAKE SWITCH - CIRCUIT OPEN |
| C1400-97 | ELECTRIC PARK BRAKE SWITCH - COMPONENT OR SYSTEM OPERATION OBSTRUCTED OR BLOCKED |
| C1403-01 | ELECTRIC PARK BRAKE MOTOR RIGHT - GENERAL ELECTRICAL FAILURE |
| C1403-11 | ELECTRIC PARK BRAKE MOTOR RIGHT - CIRCUIT SHORT TO GROUND |
| C1403-13 | ELECTRIC PARK BRAKE MOTOR RIGHT - CIRCUIT OPEN |
| C1403-15 | ELECTRIC PARK BRAKE MOTOR RIGHT - CIRCUIT SHORT TO BATTERY OR OPEN |
| C1405-01 | ELECTRIC PARK BRAKE MOTOR LEFT - GENERAL ELECTRICAL FAILURE |
| C1405-11 | ELECTRIC PARK BRAKE MOTOR LEFT - CIRCUIT SHORT TO GROUND |
| C1405-13 | ELECTRIC PARK BRAKE MOTOR LEFT - CIRCUIT OPEN |
| C1405-15 | ELECTRIC PARK BRAKE MOTOR LEFT - CIRCUIT SHORT TO BATTERY OR OPEN |
| C1406-86 | ELECTRIC PARK BRAKE SIGNAL FAULT - SIGNAL INVALID |
| C1407-19 | ELECTRIC PARK BRAKE REQUEST ACTUATION FAULT MOTOR RIGHT - CIRCUIT CURRENT ABOVE THRESHOLD |
| C1407-77 | ELECTRIC PARK BRAKE REQUEST ACTUATION FAULT MOTOR RIGHT - COMMANDED POSITION NOT REACHABLE |
| C1408-19 | ELECTRIC PARK BRAKE REQUEST ACTUATION FAULT MOTOR LEFT - CIRCUIT CURRENT ABOVE THRESHOLD |
| C1408-77 | ELECTRIC PARK BRAKE REQUEST ACTUATION FAULT MOTOR LEFT - COMMANDED POSITION NOT REACHABLE |
| C1409-01 | ELECTRIC PARK BRAKE MOTOR LEFT - GENERAL ELECTRICAL FAILURE |
| C1409-07 | MECHANICAL FAULT RIGHT EPB ACTUATOR - MECHANICAL FAILURES |
| C1409-19 | EVENT ACTUATOR CAN'T ACHIEVE CLAMP LEFT - CIRCUIT CURRENT ABOVE THRESHOLD |
| C140A-07 | MECHANICAL FAULT LEFT EPB ACTUATOR - MECHANICAL FAILURES |
| C140B-94 | INCOHERENT STATE OF EPB - UNEXPECTED OPERATION |
| C140C-04 | ELECTRIC PARK BRAKE SOFTWARE INCOMPATIBLE - SYSTEM INTERNAL FAILURE |
| C140D-54 | ASSEMBLY CHECK NOT PERFORMED - MISSING CALIBRATION |
| C140E-53 | ELECTRIC PARK BRAKE IN MAINTENANCE MODE - DEACTIVATED |
| C1416-87 | VIN MESSAGE - MISSING MESSAGE |
| C1420-64 | DASM IMPLAUSIBILITY REQUEST - SIGNAL PLAUSIBILITY FAILURE |
| C1425-01 | LED SWITCH EPB FAULT - GENERAL ELECTRICAL FAILURE |
| C1427-87 | ORC YRS DATA MESSAGE (FROM OCCUPANT RESTRAINT CONTROLLER) - MISSING MESSAGE |
| C1428-87 | AIRBAG 1 MESSAGE (FROM OCCUPANT RESTRAINT CONTROLLER) - MISSING MESSAGE |
| C1429-86 | SEAT BELT INFORMATION FAILURE - SIGNAL INVALID |
| C1434-86 | CROSS CHECK ACCELERATION OR DECELERATION REQUEST FROM ADAPTIVE CRUISE CONTROL (ACC) SYSTEM - INVALID SIGNAL |
| C1435-86 | CROSS CHECK SIGNAL NOT AVAILABLE FOR ADAPTIVE CRUISE CONTROL (ACC) SYSTEM - INVALID SIGNAL |
| C1436-86 | CROSS CHECK BRAKE PEDAL DEACTIVATION FOR ADAPTIVE CRUISE CONTROL (ACC) SYSTEM - INVALID SIGNAL |
| C1437-86 | CROSS CHECK LONGITUDINAL ACCELERATION SIGNAL FROM ORC NOT VALID FOR ACC FUNCTION - INVALID SIGNAL |
| C1439-87 | EXTERNAL_LIGHT (FROM BODY CONTROL MODULE) - MISSING MESSAGE |
| C1440-87 | MOT TRANSM 3 AND OR MOT TRANSM 4 MESSAGE FROM ENGINE CONTROL MODULE - MISSING MESSAGE |
| C1500-92 | EVENT ACTUATOR POSITION INCOHERENT - PERFORMANCE OR INCORRECT OPERATION |
| C1501-87 | BODY4 (FROM BODY CONTROL MODULE) - MISSING MESSAGE |
| C2200-00 | ORIGINAL VIN MISMATCH/MISSING - NO SUBTYPE INFORMATION |
| U0001-87 | CAN-C BUS MISSING MESSAGE |
| U0001-88 | CAN-C BUS OFF |
| U110E-29 | EXTERNAL TEMPERATURE SENSOR - SIGNAL SIGNAL INVALID |
| U146A-86 | AIRBAG4.DPD SENSOR STATUS - SIGNAL INVALID |
| U1700-86 | IMPLAUSIBLE DATA RECEIVED FROM BCM |
| U1700-87 | LOST COMMUNICATION WITH BCM |
| U1701-86 | IMPLAUSIBLE DATA RECEIVED FROM PCM |
| U1701-87 | LOST COMMUNICATION WITH PCM |
| U1702-86 | ELECTRIC POWER STEERING (EPS) - SIGNAL INVALID |
| U1702-87 | ELECTRICAL POWER STEERING (EPS) - MISSING MESSAGE |
| U1703-86 | IPC (INSTRUMENT PANEL CLUSTER) - SIGNAL INVALID |
| U1703-87 | INSTRUMENT PANEL CLUSTER (IPC) - MISSING MESSAGE |
| U1711-86 | IMPLAUSIBLE DATA RECEIVED FROM TCM |
| U1711-87 | LOST COMMUNICATION WITH TCM |
| U1712-86 | SAS-STEERING ANGLE SENSOR - SIGNAL INVALID |
| U1712-87 | SAS-STEERING ANGLE SENSOR - MISSING MESSAGE |
| U1726-86 | OCCUPANT RESTRAINT CONTROL (ORC) - SIGNAL INVALID |
| U1726-87 | OCCUPANT RESTRAINT CONTROL (ORC) - MISSING MESSAGE |
| U1730-86 | HALF (HAPTIC LANE FEEDBACK)-SIGNAL INVALID |
| U1730-87 | HALF (HAPTIC LANE FEEDBACK)-MISSING MESSAGE |
| U1757-86 | DRIVE ASSISTANT SYSTEM MODULE (DASM) - SIGNAL INVALID |
| U1757-87 | DRIVE ASSISTANT SYSTEM MODULE (DASM) - MISSING MESSAGE |
| U1930-86 | INTERNAL IGNITION WORKING CONDITION SIGNAL - SIGNAL INVALID |
| U1932-86 | IGNITION WORKING CONDITION SIGNAL FROM BODY CONTROL MODULE - SIGNAL INVALID |
| U1933-87 | BCM COMMAND MESSAGE FROM BCM (BODY COMPUTER MODULE) ABSENT - MISSING MESSAGE |
| U1934-87 | BCM COMMAND AND BODY2 MESSAGE FROM BCM (BODY COMPUTER MODULE) ABSENT - MISSING MESSAGE |
| U1950-83 | MESSAGE COUNTER/CRC FAULT IN BCM COMMAND (FROM BODY CONTROL MODULE) MESSAGE - VALUE OF SIGNAL PROTECTION CALCULATION INCORRECT |
| U1960-83 | MESSAGE COUNTER/CRC FAULT IN ENGINE1 (FROM ENGINE CONTROL MODULE) - VALUE OF SIGNAL PROTECTION CALCULATION INCORRECT |
| U1966-83 | MESSAGE COUNTER-CRC FAULT IN GE - FROM ELECTRICAL POWER STEERING - VALUE OF SIGNAL PROTECTION CALCULATION INCORRECT |
| U1972-83 | MESSAGE COUNTER CRC FAULT IN ORC YRS DATA FROM OCCUPANT RESTRAINT CONTROLLER - VALUE OF SIGNAL PROTECTION CALCULATION INCORRECT |
| U197C-83 | IMPLAUSIBILE DATA RECEIVED FROM TRANSMISSION CONTROL MODULE CAN MESSAGE TRANSM2 INTEGRITY ERROR - VALUE OF SIGNAL PROTECTION CALCULATION INCORRECT |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.