Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023PROMASTER 3500 CUTAWAYREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
2023 Dodge and Ram ProMaster 3500 Cutaway
Quick Lookups: Fluids
2023 Dodge and Ram ProMaster 3500 CutawaySECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 1.44 LBS. | 0.65 KG | R-134a | S | |||
| Automatic Transmission Fluid | Overhaul | 9.00 QTS. | 8.51 L | MOPAR ZF 8&9 Speed ATF or equivalent | S | ||
| Automatic Transmission Fluid | Service Fill | 5.50 QTS. | 5.2 L | MOPAR ZF 8&9 Speed ATF or equivalent | Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. | S | |
| Brake Fluid | N/A | N/A | MORAR Brake Fluid DOT 4 | S | |||
| Engine Coolant | 10.50 QTS. | 9.93 L | MOPAR Antifreeze Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) | Includes: heater and coolant recovery tank filled to "max" level. | S | ||
| Engine Oil | w/Filter | 6.00 QTS. | 5.67 L | API- Certified SAE 0W-20 Full Synthetic Engine Oil | S | ||
| Fuel Tank | 24.00 GALS. | 90.84 L | S | ||||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.