Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023PROMASTER 3500 CUTAWAYREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOLLISION/AVOIDANCE(PARK ASSIST MODULE 2 (PAM) (PAM2) - ELECTRICAL DIAGNOSTICS)
2023 Dodge and Ram ProMaster 3500 Cutaway
(Park Assist Module 2 (PAM) (PAM2) - Electrical Diagnostics)
2023 Dodge and Ram ProMaster 3500 CutawaySECTION (Park Assist Module 2 (PAM) (PAM2) - Electrical Diagnostics)
- Diagnostic Code Index
- DTC Troubleshooting
- B0118-95-Configuration Mismatch - Incorrect Assembly
- B0126-54-Calibration Missing - Missing Calibration
- B1000-16-Electronic Control Unit - Circuit Voltage Below Threshold
- B1000-17-Electronic Control Unit - Circuit Voltage Above Threshold
- B1000-44-Electronic Control Unit - Data Memory Failure
- B1000-45-Electronic Control Unit - Program Memory Failure
- B1000-46-Electronic Control Unit - Calibration/Parameter Memory Failure
- B1000-47-Electronic Control Unit - Watchdog/Safety MC Failure
- B1000-96-Electronic Control Unit - Component Internal Failure
- B210C-16-Battery Voltage Input - Circuit Voltage Below Threshold
- B210C-17-Battery Voltage Input - Circuit Voltage Above Threshold
- C1005-12-Sensor Front Lateral Left - Circuit Short To Battery
- C1005-14-Sensor Front Lateral Left - Circuit Short To Ground Or Open
- C1005-29-Sensor Front Lateral Left - Signal Signal Invalid
- C1006-12-Sensor Rear Lateral Left - Circuit Short To Battery
- C1006-14-Sensor Rear Lateral Left - Circuit Short To Ground Or Open
- C1006-29-Sensor Rear Lateral Left - Signal Signal Invalid
- C1007-12-Sensor Rear LATARAL Right - Circuit Short To Battery
- C1007-14-Sensor Rear LATARAL Right - Circuit Short To Ground Or Open
- C1008-12-Sensor Front Lateral Right - Circuit Short To Battery
- C1008-14-Sensor Front Lateral Right - Circuit Short To Ground Or Open
- C1008-29-Sensor Front Lateral Right - Signal Signal Invalid
- C1017-16-Sensor Power Supply - Circuit Voltage Below Threshold
- C1017-17-Sensor Power Supply - Circuit Voltage Above Threshold
- U1001-87-C2 Can - Missing Message
- U1001-88-C2 Can - Bus Off
- U1700-86-BCM Body Computer Module - Signal Invalid
- U1706-87-BSM Brake System Control Module - Missing Message
- U1724-86-PAM Parking Assistant Module - Signal Invalid
- U1724-87-PAM Parking Assistant Module - Missing Message
- U1930-29-Internal Ignition Working Condition Signal - Signal Signal Invalid
- U1933-86-BCM_Command (From Body Computer Module) - Signal Invalid
- U1933-87-BCM_Command (From Body Computer Module) - Missing Message
- U1972-64-PAM_CRC_MCFAILSTS.Info - Signal Plausibility Failure
- U1975-64-PAM_OPERATIONALMODESTS.Info - Signal Plausibility Failure
- U1992-64-BCM_Command.OPERATIONALMODESTS - Signal Plausibility Failure
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.