Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023PROMASTER 1500REPAIR AND DIAGNOSISMAINTENANCEPROCEDURESVEHICLE QUICK REFERENCECAPACITIES AND RECOMMENDED FLUIDSSPECIFICATIONSFLUID CAPACITIESTRANSMISSION
2023 Dodge and Ram ProMaster 1500
Fluid Capacities: Transmission
2023 Dodge and Ram ProMaster 1500SECTION Transmission
| Description | Type | Capacities | Part Number | Global Part Number | |
|---|---|---|---|---|---|
| U.S. | Metric | ||||
| 9HP48 Automatic Transaxle | Use only Mopar® ZF 8 & 9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. | 6.35 Quarts | 6.0 Liters | 68218925AA | 68218925GA |
| 9HP48 Overhaul Fill | Refer to FLUID AND FILTER, STANDARD PROCEDURE . | ||||
| Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures. | |||||
|
CAUTION:
Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure. |
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.