Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSDODGE AND RAM2023PROMASTER 1500REPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOLLISION/AVOIDANCEELECTRONIC CONTROL MODULES (SERVICE INFORMATION)MODULE, DISPLAY SCREEN (DSM)REMOVAL7 INCH SCREEN

2023 Dodge and Ram ProMaster 1500

7 Inch Screen

2023 Dodge and Ram ProMaster 1500SECTION 7 Inch Screen

Courtesy of CHRYSLER GROUP, LLC

Using a trim stick or equivalent, release the center air outlets (1) and remove them from the vehicle.

Courtesy of CHRYSLER GROUP, LLC
Remove the fasteners (1) that secure the DSM (2).
Disconnect the wire harness connectors and remove the DSM (2) from the vehicle.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.