Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2023 Dodge and Ram Hornet GT
Quick Lookups: Fluids
2023 Dodge and Ram Hornet GTSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.40 OZS. | 0.13 L | ND-12 | S | |||
| Air Cond Refrigerant | 1.36 LBS. | 0.61 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | 6.35 QTS. | 6 L | MOPAR ZF 8&9 Speed Automatic Transmission Fluid | Failure to use the correct fluid may affect the function or performance of the transmission. Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. | S | ||
| Brake Fluid | N/A | N/A | MOPAR DOT4 (TUTELA TOP EVO) | S | |||
| Differential Gear Oil | Rear Axle | 0.63 QTS. | 0.59 L | Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90, API - GL-5 | S | ||
| Engine Coolant | Engine Cooling System | 7.00 QTS. | 6.62 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent | S | ||
| Engine Coolant | Intercooler,LowTemperature Coolant Circuit | 2.30 QTS. | 2.17 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. | S | |
| Engine Oil | 5.00 QTS. | 4.73 L | API - SP/GF-6 Certified SAE 5W-30 Full Synthetic Engine Oil meeting Material Standard: MS-13340 | S | |||
| Fuel Tank | 13.50 GALS. | 51.1 L | S | ||||
| Transfer Case Fluid | 0.42 QTS. | 0.39 L | MOPAR Front Axle/PTU Synthetic Axle Lubricant, SAE 75W-90, API - GL-5 | S | |||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.