Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO SXT, AWDREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSHEATING AND AIR CONDITIONING - DTCS B11C7-00 TO B11F2-15DTC TROUBLESHOOTINGB11CD-00-MAIN/LEFT TEMPERATURE DOOR TRAVEL TOO LARGEDEFAULT ACTION
2023 Dodge and Ram Durango SXT, AWD
Default Action
2023 Dodge and Ram Durango SXT, AWDSECTION Default Action
- If an Actuator Calibration Test is performed or during normal operation and the HVAC Module detects a valid range of the door movement span in both directions, the DTC will change from Active to Stored and will stay in the HVAC Module memory for 100 ignition cycles.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.