Technical Specifications: Specifications

2023 Dodge and Ram Durango SRT Hellcat PremiumSECTION Specifications
TORQUE SPECIFICATIONS

DESCRIPTION N.m Ft. Lbs. In. Lbs. COMMENT
Seat Belt Turning Loop Adjuster Mounting Screws 55 41 -  
Front Seat Belt Turning Loop Mounting Nut 47 35 -  
Driver Airbag (Horn Switch) Mounting Screws 13 10 -  
Knee AirBag Mounting Nuts 9 - 80  
Passenger Airbag Mounting Nuts 10 - 89  
Seat Airbag Mounting Nuts 7 - 62  
Side Curtain Airbag Inflator Bracket Mounting Screws 8 - 71  
Side Curtain Airbag Mounting Screws 8 - 71  
Front Seat Belt Buckle Lower Anchor Mounting Screw 45 33 -  
Second Row Seat Belt Buckle Lower Anchor Mounting Screw 50 37 -  
Third Row Seat Belt Buckle Lower Anchor Mounting Screw 50 37 -  
Occupant Restraint Controller Mounting Nuts 9 - 80  
Front Seat Belt Retractor Mounting Screw 55 41 -  
Front Seat Belt Lower Anchor Mounting Screw 54 40 -  
Second Row Center Retractor Mounting Screw 55 41 -  
Second Row Center Seat Belt Lower Anchor Mounting Screw 54 40 -  
Second Row Outboard Seat Belt Retractor Mounting Screw 54 40 -  
Second Row Outboard Seat Belt Turning Loop Mounting Screw 55 41 -  
Second Row Outboard Seat Belt Lower Anchor Mounting Screw 50 37 -  
Third Row Seat Belt Retractor Mounting Screw 55 41 -  
Third Row Seat Belt Turning Loop Mounting Screw 55 41 -  
Front Impact Sensor Mounting Screw 11 - 97  
Front Door Pressure Impact Sensor Mounting Screws 2.4 - 21  
Side Impact Sensor Mounting Screws 11 - 97  
Seat Track Position Sensor Mounting Screw 2 - 15  
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.