Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO R/T PREMIUM, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 38 (6.2L - DTCS C053D TO P00E1)DTC TROUBLESHOOTINGP0096-INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT PERFORMANCESET CONDITION
2023 Dodge and Ram Durango R/T Premium, AWD
Set Condition
2023 Dodge and Ram Durango R/T Premium, AWDSECTION Set Condition
WARNING: This page is about a different variant/trim than selected.
- After a calibrated amount of cool down time, the Powertrain Control Module (PCM) compares the Ambient Air Temperature (AAT), Engine Coolant Temperature (ECT), and Supercharger Inlet Temp Sensor values. If the Supercharger Inlet Temp Sensor value is not within 15°C (59°F) of the other temperature sensors, a DTC will set.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.