Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO R/T PLUS, RWDREPAIR AND DIAGNOSISENGINE PERFORMANCEIGNITION SYSTEM (SERVICE INFORMATION)TECHNICAL SPECIFICATIONSTORQUE SPECIFICATIONS
2023 Dodge and Ram Durango R/T Plus, RWD
Torque Specifications
2023 Dodge and Ram Durango R/T Plus, RWDSECTION Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | NEW FASTENER (3) | ||
|---|---|---|---|---|---|---|
| Camshaft Position Sensor Bolt (CMP) - 3.6L | 9 | - | 80 | |||
| Camshaft Position Sensor - 5.7L | 12 | 9 | - | |||
| Camshaft Position Sensor - 6.2L | 12 | 9 | - | |||
| Camshaft Position Sensor - 6.4L | 12 | 9 | - | |||
| Ignition Capacitor Nut | 10 | - | 89 | |||
| Ignition Capacitor Stud to Cylinder Head | 28 | 21 | - | |||
| Ignition Coil Mounting - 3.6L | 7 | - | 62 | |||
| Ignition Coil Mounting - 5.7L | 7 | - | 62 | |||
| Ignition Coil Mounting - 6.2L | 7 | - | 62 | |||
| Ignition Coil Mounting - 6.4L | 7 | - | 62 | |||
| (1) Knock Sensor - 3.6L | 22 | 16 | - | |||
| (1) Knock Sensor - 5.7L | 20 | 15 | - | |||
| (1) Knock Sensor - 6.2L | 20 | 15 | - | |||
| (1) Knock Sensor - 6.4L | 20 | 15 | - | |||
| Spark Plugs - 3.6L | 20 | 15 | - | |||
| Spark Plugs - 5.7L | 25 | 18 | - | |||
| Spark Plugs - 6.2L | 25 | 18 | - | |||
| (2) Spark Plugs - 6.4L | 15 | 11 | - | |||
| Variable Valve Timing Solenoids - 3.6L | 4 | - | 35 | |||
| Negative Battery Cable Nut | 5 | - | 45 | |||
|
||||||
|
||||||
|
||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.