Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO R/T PLUS, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 3 (6.2L ENGINE (SERVICE INFORMATION))TECHNICAL SPECIFICATIONSTORQUE SPECIFICATIONSENGINE BLOCK
2023 Dodge and Ram Durango R/T Plus, AWD
Engine Block
2023 Dodge and Ram Durango R/T Plus, AWDSECTION Engine Block
WARNING: This page is about a different variant/trim than selected.
ENGINE BLOCK
| DESCRIPTION | N. m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Camshaft Phaser Bolt | 95 | 70 | - | |
| Camshaft Thrust Plate Bolts | 13 | - | 115 | |
| Coolant Drain Plugs 1/4 x 18 NPT | 34 | 25 | - | |
| Connecting Rod Cap Bolts | 40 plus 90° Turn | 30 plus 90° Turn | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tighten to specifications. |
| Crankshaft Main Bearing Cap Bolts | Specific torque and fastener pattern required; follow installation sequence. Refer to CRANKSHAFT, INSTALLATION . | |||
| Variable Valve Timing Solenoid Bolt | 11 | - | 97 | |
| Lifter Guide Holder | 12 | 9 | - | |
| Oil Cooler Shroud Bolts | 7 | - | 62 | |
| Oil Pan Bolts | Specific torque and fastener pattern required; follow installation sequence. Refer to PAN, OIL, INSTALLATION . | Do not reuse these fasteners. If removed, a new fastener must be installed and tighten to specifications. | ||
| Oil Dipstick Tube | 11 | - | 97 | |
| Oil Filter Adapter-Engine Oil Cooler | 40 | 30 | - | |
| Oil Gallery Plugs 1/4 x 18 NPT | 20 | - | 177 | |
| Oil Pan Drain Plug | 27 | 20 | - | |
| Oil Pressure Sensor | 15 | 11 | - | |
| Oil Pump to Engine Block Bolts | 32 | 23 | - | |
| Oil Pump Cover Bolts. | 15 | - | 133 | |
| Oil Pump Pickup Tube Bolt | 28 | 21 | - | |
| Oil Pump Pickup Tube Nut | 12 | 9 | - | |
| Oil Temperature Sensor | 50 | 37 | - | |
| Piston Oil Cooler Jet Bolts | 11 | 8 | - | |
| Plugs 3/8 x 18 NPT | 27 | 20 | - | |
| Timing Chain Guide Bolts | 11 | 97 | ||
| Timing Chain Tensioner Bolts | 11 | - | 97 | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.