Rocker Arm, Valve: Installation

2023 Dodge and Ram Durango R/T Plus, AWDSECTION Installation
WARNING: This page is about a different variant/trim than selected.
GC0209723Courtesy of CHRYSLER GROUP, LLC
CAUTION:

The longer pushrods are for the exhaust side, and the shorter pushrods are for intake side.

  1. Install the push rods in the same order as removed.
  2. Install the Push Rod Retainer (special tool #9070, Retainer, Push Rod) (1).
    GC0209722Courtesy of CHRYSLER GROUP, LLC
    CAUTION:

    Ensure the retainers (1) and rocker arms (3) are not overlapped when torquing bolts.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.