Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO R/T PLUS, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 3 (6.2L ENGINE (SERVICE INFORMATION))AIR INTAKE SYSTEMAIR CLEANERINSTALLATION
2023 Dodge and Ram Durango R/T Plus, AWD
Air Cleaner: Installation
2023 Dodge and Ram Durango R/T Plus, AWDSECTION Installation
WARNING: This page is about a different variant/trim than selected.
- Install the air cleaner element (1) into the housing.
- Align the air cleaner housing cover locating tabs into the housing while lowering the cover into position.
- Insert air cleaner inlet tube onto the throttle body and tighten the clamp to the proper specification. Refer to TORQUE SPECIFICATIONS .
- Install the air cleaner housing cover retaining screws (4) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS .
- Connect the Inlet Air Temperature (IAT) sensor wire harness connector (3).
- Connect the make-up air hose (2).
- Connect the negative battery cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.