Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO GT, RWDREPAIR AND DIAGNOSISSTEERINGSTEERING LINKAGESTEERING SYSTEMCOLUMNWHEEL, STEERINGREMOVAL
2023 Dodge and Ram Durango GT, RWD
Wheel, Steering: Removal
2023 Dodge and Ram Durango GT, RWDSECTION Removal
WARNING:
Before servicing the steering column the airbag system must be disarmed. Failure to do so may result in accidental deployment of the airbag and possible personal injury.
- Position front wheels straight ahead.
- Disconnect and isolate the negative (ground) cable from the battery.
- Disable and remove the drivers side airbag. Refer to AIR BAG, DRIVER, REMOVAL .
- Disconnect all electrical connectors.
- Remove the steering wheel bolt (1).
- Remove steering wheel damper, if equipped.
- Slide the steering wheel (2) off the steering column assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.