Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO GT, RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 6 (8HP70 AUTOMATIC TRANSMISSION (SERVICE INFORMATION))TECHNICAL SPECIFICATIONSCLUTCH SPECIFICATIONS
2023 Dodge and Ram Durango GT, RWD
Clutch Specifications
2023 Dodge and Ram Durango GT, RWDSECTION Clutch Specifications
WARNING: This page is about a different variant/trim than selected.
| Clutch | Condition | Minimum | Normal | Maximum |
|---|---|---|---|---|
| A | NEW | 1.41 mm | 1.555 mm | 1.7 mm |
| 0.056 in. | 0.061 in. | 0.067 in. | ||
| AFTER OPERATION | 1.41 mm | 1.655 mm | 1.9 mm | |
| 0.056 in. | 0.065 in. | 0.075 in. | ||
| Β | ||||
| B | NEW | 1.52 mm | 1.725 mm | 1.93 mm |
| 0.060 in. | 0.068 in. | 0.076 in. | ||
| AFTER OPERATION | 1.52 mm | 1.825 mm | 2.13 mm | |
| 0.060 in. | 0.072 in. | 0.084 in. | ||
| Β | ||||
| C | NEW | 1.62 mm | 1.815 mm | 2.01 mm |
| 0.064 in. | 0.071 in. | 0.079 in. | ||
| AFTER OPERATION | 1.62 mm | 1.935 mm | 2.25 mm | |
| 0.064 in. | 0.076 in. | 0.089 in. | ||
| Β | ||||
| D | NEW | 1.37 mm | 1.515 mm | 1.66 mm |
| 0.054 in. | 0.060 in. | 0.065 in. | ||
| AFTER OPERATION | 1.37 mm | 1.615 mm | 1.86 mm | |
| 0.054 in. | 0.064 in. | 0.073 in. | ||
| Β | ||||
| E | NEW | 1.62 mm | 1.815 mm | 2.01 mm |
| 0.064 in. | 0.071 in. | 0.079 in. | ||
| AFTER OPERATION | 1.62 mm | 1.935 mm | 2.25 mm | |
| 0.064 in. | 0.076 in. | 0.089 in. | ||
| Β | ||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.