Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO GT, RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 3 (6.2L ENGINE (SERVICE INFORMATION))TECHNICAL SPECIFICATIONSENGINE SPECIFICATIONSCYLINDER BLOCK
2023 Dodge and Ram Durango GT, RWD
Cylinder Block
2023 Dodge and Ram Durango GT, RWDSECTION Cylinder Block
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK
| DESCRIPTION | SPECIFICATION | |
|---|---|---|
| Metric | Standard | |
| Cam Bore 1 Diameter | 61.71 - 61.73 mm | 2.4295 - 2.4303 in. |
| Cam Bore 2 Diameter | 57.85 - 57.87 mm | 2.2776 - 2.2783 in. |
| Cam Bore 3 Diameter | 57.44 - 57.46 mm | 2.2614 - 2.2622 in. |
| Cam Bore 4 Diameter | 57.05 - 57.07 mm | 2.2461 - 2.2469 in. |
| Cam Bore 5 Diameter | 43.673 - 43.693 mm | 1.7194 - 1.7202 in. |
| Cylinder Bore Diameter | 103.9 mm | 4.09 in. |
| Out of Round (MAX) | 0.008 mm | 0.0003 in. |
| Taper (MAX) | 0.014 mm | 0.0006 in. |
| Lifter Bore Diameter | 21.45-21.42 mm | 0.8444-0.8433 in. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.