Intake Valve Spring And Exhaust Valve Spring

2023 Dodge and Ram Durango GT, RWDSECTION Intake Valve Spring And Exhaust Valve Spring
WARNING: This page is about a different variant/trim than selected.
DESCRIPTION SPECIFICATION
Metric Standard
Spring Force (valve closed) 435.0 N +/- 22.0 N @ 45 mm 97.8 lbs +/- 5.0 lbs. @ 1.771 in.
Spring Force (valve open) 1077.0 N +/- 48.0 N @ 32.6 mm. 242.0 lbs. +/- 11 lbs. @ 1.283 in.
Free Length (approx). 55.6 mm 2.189 in.
Number of Coils 7.95
Wire Diameter 4.95 X 4.1 mm 0.194 - 0.161 in.
Installed Height (spring seat to bottom of retainer) 50.5 mm 1.99 in.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.