Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO GT, AWDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANS8HP50/850RE AUTOMATIC TRANSMISSION - DTCS P07BA-00 TO P1D90-00DTC TROUBLESHOOTINGP0963-00-PRESSURE CONTROL SOLENOID 1 CONTROL CIRCUIT HIGHWHEN MONITORED
2023 Dodge and Ram Durango GT, AWD
When Monitored
2023 Dodge and Ram Durango GT, AWDSECTION When Monitored
This diagnostic runs continuously when the following conditions are met:
- Pressure Control Solenoids:
- Ignition on.
- Output stages power supply is activated.
- Shift Solenoids:
- Short to Battery:
- Output stages power supply is activated.
- Output stage is commanded above 5% Pulse Width Modulated (PWM).
- Open Circuit or Short to Ground:
- Output stages power supply is activated.
- Short to Battery:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.