DECKLID/Hatch/Liftgate/Tailgate/Swing Gate: Spoiler: Removal

2023 Dodge and Ram Durango GT Premium, RWDSECTION Removal
GC0208943Courtesy of CHRYSLER GROUP, LLC
  1. Remove the header trim (3).
  2. Disconnect the wire harness connector to the courtesy light (2), if equipped.
    GC0209028Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the washer solvent supply hose and the wire harness connector (2).
    GC0209030Courtesy of CHRYSLER GROUP, LLC
  4. Remove the liftgate trim panels (2). Refer to PANEL, TRIM, REMOVALΒ .
    GC0209027Courtesy of CHRYSLER GROUP, LLC
  5. Remove the nuts (1).
    GC0190474Courtesy of CHRYSLER GROUP, LLC
  6. Remove grommet (1) from liftgate.
    GC0190471Courtesy of CHRYSLER GROUP, LLC
  7. Squeeze plastic retainer clip tabs (1) through access hole to release spoiler.
  8. Lower the liftgate.
  9. Pivot the spoiler towards the front of the vehicle.
  10. Separate the washer solvent grommet.
  11. Remove spoiler from vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.