SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO GT PREMIUM, RWDREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSBODY - INTERIOR AND EXTERIOR (1 OF 2)DECKLID/HATCH/LIFTGATE/TAILGATE/SWING GATEPANEL, TRIMREMOVAL
2023 Dodge and Ram Durango GT Premium, RWD

Panel, Trim: Removal

2023 Dodge and Ram Durango GT Premium, RWDSECTION Removal
multimedia:A supplement to the article is available.
GC0202833Courtesy of CHRYSLER GROUP, LLC
  1. Press down on the pull cup (2).
  2. Using a (special tool #C-4755, Trim Stick) or equivalent, at the top in the center (1), release the cup from the trim panel.
    GC0209029Courtesy of CHRYSLER GROUP, LLC
  3. Remove the two pull cups (1) from the lower trim panel.
    GC0209047Courtesy of CHRYSLER GROUP, LLC
    CAUTION:

    Trim panel attachment clips should be discarded and replaced with new ones anytime the trim is removed.

  4. Using a (special tool #C-4755, Trim Stick) or equivalent, release the lower retaining clips (3) and carefully pry the trim panel (1) away from the inside of the liftgate (4).
  5. Carefully release the upper retaining clips (2) and separate the trim panel completely from the liftgate.
  6. Disconnect the trim panel lighting connectors.
  7. Remove the lower liftgate trim panel from the vehicle.
  8. Remove and discard the trim panel attachments clips.
    GC0209030Courtesy of CHRYSLER GROUP, LLC
  9. Remove the upper trim panel (2) using a (special tool #C-4755, Trim Stick) or equivalent, carefully pry the trim panel away from the inside of the liftgate (1) to release the fasteners that secure the panel to the liftgate.
  10. Remove and discard the trim panel attachments clips.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.