Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023CHARGER SXT, 4WDREPAIR AND DIAGNOSISSUSPENSIONFRONT SUSPENSIONFRONT SUSPENSION & WHEEL ALIGNMENTFRONTBUSHING(S), LOWER CONTROL ARMREMOVAL
2023 Dodge and Ram Charger SXT, 4WD
Bushing(S), Lower Control Arm: Removal
2023 Dodge and Ram Charger SXT, 4WDSECTION Removal
- Remove lower control arm. Refer to ARM, LOWER CONTROL, RWD, REMOVAL .
- Assemble the parts of Remover/Installer as shown in the illustration (special tool #2049004020, Receiver, Bushing) (1), (special tool #2049003020, Remover, Bushing) (3), (special tool #C-4212F, Press, Ball Joint) (4).
- Thread the rod in until the lower control arm bushing (2) is pressed out of the lower control arm.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.