Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023CHARGER GT, 4WDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICES(PASSENGER DOOR MODULE (PDM) (DMFL/R) - ELECTRICAL DIAGNOSTICS)
2023 Dodge and Ram Charger GT, 4WD
(Passenger Door Module (PDM) (DMFL/R) - Electrical Diagnostics)
2023 Dodge and Ram Charger GT, 4WDSECTION (Passenger Door Module (PDM) (DMFL/R) - Electrical Diagnostics)
- Diagnostic Code Index
- DTC Troubleshooting
- B1751-11-Courtesy Lamp Control - Circuit Short To Ground
- B1751-15-Courtesy Lamp Control - Circuit Short To Battery Or Open
- B18BA-11-Window Control - Circuit Short To Ground
- B18BA-12-Window Control - Circuit Short To Battery
- B18BA-13-Window Control - Circuit Open
- B18BA-4B Window Control - Over Temperature
- B18E6-2A-Window Switch - Stuck
- B1DD0-11-Mirror Heater Control - Circuit Short To Ground
- B1DD0-15-Mirror Heater Control - Circuit Short To Battery Or Open
- B1F02-11-Mirror Vertical Motor Control - Circuit Short To Ground
- B1F02-12-Mirror Vertical Motor Control - Circuit Short To Battery
- B1F02-13-Mirror Vertical Motor Control - Circuit Open
- B1F03-11-Mirror Horizontal Motor Control - Circuit Short To Ground
- B1F03-12-Mirror Horizontal Motor Control - Circuit Short To Battery
- B1F03-13-Mirror Horizontal Motor Control - Circuit Open
- B1F05-11-ELECTROCHROMATIC Mirror Control Circuit-Circuit Short To Ground
- B1F05-12-ELECTROCHROMATIC Mirror Control Circuit-Circuit Short To Battery
- B1F05-13-ELECTROCHROMATIC Mirror Control Circuit-Circuit Open
- B1F06-12-Mirror Control Sensor Position Circuit - Circuit Short To Battery
- B1F06-14-Mirror Control Sensor Position Circuit - Circuit Short To Ground Or Open
- B210C-16-Battery Voltage Input - Circuit Voltage Below Threshold
- B210C-17-Battery Voltage Input - Circuit Voltage Above Threshold
- B21DD-84-System Voltage - Signal Below Allowable Range
- B21DD-85-System Voltage - Signal Above Allowable Range
- B224F-54-Door Module Internal - Missing Calibration
- B224F-96-Door Module Internal - Component Internal Failure
- B25AF-2A-Door Lock/Unlock Switch - Stuck
- B25B0-31-Window Position Sensor - No Signal
- B25B1-11-Window Position Sensor Power Supply - Circuit Short To Ground
- B285E-11-Window Switch Backlighting - Circuit Short To Ground
- B285F-11-Blind Spot Warning Light Control - Circuit Short To Ground-Pass
- B285F-15-Blind Spot Warning Light Control - Circuit Short To Battery Or Open
- B2860-11-Door Ambient Light Control - Circuit Short To Ground
- B2860-15-Door Ambient Light Control - Circuit Short To Battery Or Open
- B2861-11-Mirror Approach Light Control - Circuit Short To Ground
- B2861-15-Mirror Approach Light Control - Circuit Short To Battery Or Open
- U0010-00-Can Interior Bus
- U0018-00-Can Interior Bus (-) Shorted To Bus (+)
- U0140-00-Lost Communication With Body Control Module
- U0164-00-Lost Communication With HVAC Control Module
- U0199-00-Lost Communication With Driver Door Module
- U0232-00 Lost Communication With Blind Spot Detection Module
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.