Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023CHALLENGER GT, RWDREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMEMISSIONS CONTROLCRANKCASE VENTILATIONVALVE, POSITIVE CRANKCASE VENTILATION (PCV)REMOVAL5.7L
2023 Dodge and Ram Challenger GT, RWD
Valve, Positive Crankcase Ventilation (PCV): Removal: 5.7L
2023 Dodge and Ram Challenger GT, RWDSECTION 5.7L
The Positive Crankcase Ventilation (PCV) valve (1) is located at the top right rear of the intake manifold.
- The PCV valve is sealed to the intake manifold with two O-rings (2).
- Remove the PCV valve by rotating counter-clockwise 90 degrees until the locating tabs (3) have been released.
- Pull the PCV valve straight up and remove from the intake manifold.
- Check the condition of the two PCV valve O-rings (2), replace if necessary.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.