Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2022DURANGO SXT, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 46 (8HP70 AUTOMATIC TRANSMISSION - DTCS P1DF9-00 TO U1479-00)DTC TROUBLESHOOTINGP2762-00-TORQUE CONVERTER CLUTCH PRESSURE CONTROL SOLENOID CONTROL CIRCUIT RANGE-PERFORMANCEWHEN MONITORED
2022 Dodge and Ram Durango SXT, AWD
When Monitored
2022 Dodge and Ram Durango SXT, AWDSECTION When Monitored
WARNING: This page is about a different variant/trim than selected.
This diagnostic runs continuously when the following conditions are met:
- Pressure Control Solenoids:
- Ignition on.
- Output stages power supply is activated.
- Shift Solenoids:
- Short to Battery:
- Output stages power supply is activated.
- Output stage is commanded above 5% Pulse Width Modulated (PWM).
- Open Circuit or Short to Ground:
- Output stages power supply is activated.
- Short to Battery:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.