Sensor, Manifold Absolute Pressure (Map): Removal: 5.7L/6.4L

2022 Dodge and Ram Durango SXT, AWDSECTION 5.7L/6.4L
WARNING: This page is about a different variant/trim than selected.
GC0104841Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect Map sensor (1) electrical connector.
  2. Rotate MAP sensor (1) counterclockwise for removal.
    GC0104842Courtesy of CHRYSLER GROUP, LLC
  3. Lift MAP sensor (1) upward.
    GC0104843Courtesy of CHRYSLER GROUP, LLC
  4. Inspect O-ring (2) for damage.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.