Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Tank, Fuel: Description
This vehicle uses a saddle type tank that has a reservoir on both sides of the driveshaft. The fuel tank is constructed of a plastic material. The fuel pressure regulator is integrated into the main fuel pump module (1) on the left side of the fuel tank and the auxiliary fuel pump module (5) is located on the right side of the fuel tank. The fuel outlet is on top of the main fuel pump module on the left side and supplies fuel to the engine. The ORVR (Onboard Refueling Vapor Recovery) control valve (4) is located at the right rear of the fuel tank. The fuel tank pressure sensor (3) is located next to the ORVR.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.