Technical Specifications: Specifications

2020 Dodge and Ram Durango GT, AWDSECTION Specifications
WARNING: This page is about a different variant/trim than selected.
SPECIFICATIONS

TYPE QUANTITY
ATF+4 1.90L (4.01 Pints)
Fill to bottom edge of the fill plug hole.
Torque Specifications

DESCRIPTION N.m Ft. Lbs. In. Lbs. COMMENTS
Bolt, Crossmember 55 41 -  
Plug, Clutch Lever Rail (Detent) 27 20 -  
Plugs, Drain/Fill 27 20 -  
Bolts, Case Half 27 20 -  
Nut, Companion Flange 149 110 -  
Bolts, T-case mount 45 33 -  
Bolts, Shift Motor 13 9 -  
Screws, Encoder 7 - 62  
Bolts, Damper (if equipped) 35 26 -  
Transfer Case Heat Shield Bolts 9 - 80  
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.