Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2020DURANGO GT, AWDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSIS3.6L - DTCS P0632 TO P152A
2020 Dodge and Ram Durango GT, AWD
3.6L - DTCS P0632 To P152A
2020 Dodge and Ram Durango GT, AWDSECTION 3.6L - DTCS P0632 To P152A
- DTC Troubleshooting
- P0632-Odometer Not Programmed In Pcm
- P063A-Generator Voltage Sense Circuit
- P0642-Sensor Reference Voltage 1 Circuit Low
- P0643-Sensor Reference Voltage 1 Circuit High
- P0645-A/C Control Circuit/Open
- P0652-Sensor Reference Voltage 2 Circuit Low
- P0653-Sensor Reference Voltage 2 Circuit High
- P0685-ASD/Main Control Circuit
- P0688-ASD/Main Sense Circuit
- P06DA-Engine Oil Pressure Control Circuit
- P06DD-Engine Oil Pressure Control Circuit Stuck Off
- P06DE-Engine Oil Pressure Control Circuit Stuck On
- P06E9-Engine Starter Performance
- P06EF-Engine Restart Performance
- P0850-Park/Neutral Switch Performance
- P1050-Intake Valve Control Solenoid 1 Circuit/Open
- P1051-Intake Valve Control Solenoid 1 Circuit Low
- P1052-Intake Valve Control Solenoid 1 Circuit High
- P1053-Intake Valve Control Solenoid 2 Circuit/Open
- P1054-Intake Valve Control Solenoid 2 Circuit Low
- P1055-Intake Valve Control Solenoid 2 Circuit High
- P1056-Intake Valve Control Solenoid 3 Circuit/Open
- P1057-Intake Valve Control Solenoid 3 Circuit Low
- P1058-Intake Valve Control Solenoid 3 Circuit High
- P1059-Intake Valve Control Solenoid 4 Circuit/Open
- P105A-Intake Valve Control Solenoid 4 Circuit Low
- P105B-Intake Valve Control Solenoid 4 Circuit High
- P105C-Intake Valve Stuck In Low Lift Position
- P105D-Intake Valve Stuck In High Lift Position
- P1070-Intake Valve Control Solenoid 1 Range/Performance
- P1071-Intake Valve Control Solenoid 2 Range/Performance
- P1072-Intake Valve Control Solenoid 3 Range/Performance
- P1073-Intake Valve Control Solenoid 4 Range/Performance
- P1115-General Temperature Rationality
- P1128-Closed Loop Fueling Not Achieved - Bank 1 Upstream
- P1129-Closed Loop Fueling Not Achieved - Bank 2 Upstream
- P1239-Engine Oil Temperature Too Low
- P1300-Crankshaft Position Learn Out Of Range
- P1400-Aftermarket Calibration Detected/Warranty Coverage Confirmation Required
- P1404-EGR Close Position Performance
- P141B-Starter Control 1 Circuit Performance
- P141C-Starter Control 2 Circuit Performance
- P141D-Starter Relay Feedback Open Circuit Performance
- P1456-Fuel Tank Pressure Sensor Circuit Low
- P1457-Fuel Tank Pressure Sensor Circuit High
- P1495-Left Front SEATBELT Switch Circuit High
- P1496-Left Front SEATBELT Switch Circuit Low
- P1524-Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled
- P152A-Engine Hood Switch Ajar While Driving
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.