Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module, Adaptive Cruise Control (Acc): Removal: Bracket
2020 Dodge and Ram Durango GT, AWDSECTION Bracket
- Remove the Adaptive Cruise Control (ACC) module from the mounting bracket. Refer to MODULE, ADAPTIVE CRUISE CONTROL (ACC), REMOVAL .
- Remove the two fasteners (1) that secure the bracket (2) to the underside of the front bumper support bar.
- Remove the mounting bracket from the bumper support bar.NOTE:
The three molded plastic ball socket clips in the ACC module mounting bracket MUST be removed, discarded and replaced with new ball socket clips any time the module is removed from the bracket.
- Remove the three molded plastic ball socket clips from the back side of the ACC module mounting bracket and discard. The clips are removed by rotating them counterclockwise.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.