Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM20162500 HD LIMITED, 4D PICKUP, 6.4L ENG VIN J, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESELECTRONIC CONTROL MODULES (SERVICE INFORMATION) - 2500 HD & 3500 HDMODULE, TRANSMISSION CONTROLMODULE PROGRAMMINGDRIVE LEARN - RFE TRANSMISSIONSLEARN A SMOOTH 4-5 UPSHIFT
2016 Dodge and Ram 2500 HD Limited, 4D Pickup, 6.4L Eng VIN J, 4WD
Learn A Smooth 4-5 Upshift
2016 Dodge and Ram 2500 HD Limited, 4D Pickup, 6.4L Eng VIN J, 4WDSECTION Learn A Smooth 4-5 Upshift
NOTE:
The transmission oil temperature must be above 110°F (43°C).
Use the following steps to have the TCM learn the Alt 2C CVI.
- Accelerate the vehicle through 88 km/h (55mph) at a steady 10-15 degree throttle opening and perform multiple 4-5 upshifts.
- Repeat until the 4-5 shift become smooth and the Alt 2C CVI become stable. Refer to step 1. There is a separate 2C volume used and learned for 4-5 shifts, 2CA. It is independent of the 2C CVI learned on 3-2 kickdowns.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.