Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM20151500 SPECIAL SERVICEREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEX - 1500MODULE, MEMORY SEAT, DRIVER (MSMD)
2015 Dodge and Ram 1500 Special Service
Module, Memory Seat, Driver (MSMD)
2015 Dodge and Ram 1500 Special ServiceSECTION Module, Memory Seat, Driver (MSMD)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| B1D5B-00 | ADJUSTABLE PEDAL SWITCH CIRCUIT PERFORMANCE |
| B1D5C-23 | ADJUSTABLE PEDAL SWITCH CIRCUIT STUCK FORWARD - SIGNAL STUCK LOW |
| B1D5D-23 | ADJUSTABLE PEDAL SWITCH CIRCUIT STUCK REARWARD - SIGNAL STUCK LOW |
| B1D5E-13 | POWER SEAT SWITCH - CIRCUIT OPEN |
| B1D62-2A | POWER SEAT SWITCH STUCK-STUCK |
| B1D67-00 | ADJUSTABLE PEDAL CONTROL CIRCUIT PERFORMANCE |
| B1D6B-11 | SEAT HORIZONTAL POSITION SENSOR - CIRCUIT SHORT TO GROUND |
| B1D6B-12 | SEAT HORIZONTAL POSITION SENSOR - CIRCUIT SHORT TO BATTERY |
| B1D6F-11 | SEAT FRONT VERTICAL POSITION SENSOR - CIRCUIT SHORT TO GROUND |
| B1D6F-12 | SEAT FRONT VERTICAL POSITION SENSOR - CIRCUIT SHORT TO BATTERY |
| B1D73-11 | SEAT REAR VERTICAL POSITION SENSOR - CIRCUIT SHORT TO GROUND |
| B1D73-12 | SEAT REAR VERTICAL POSITION SENSOR - CIRCUIT SHORT TO BATTERY |
| B1D77-11 | SEAT RECLINER POSITION SENSOR - CIRCUIT SHORT TO GROUND |
| B1D77-12 | SEAT RECLINER POSITION SENSOR - CIRCUIT SHORT TO BATTERY |
| B1D7B-00 | SEAT HORIZONTAL MOTOR CONTROL CIRCUIT PERFORMANCE |
| B1D7F-00 | SEAT FRONT VERTICAL MOTOR CONTROL CIRCUIT PERFORMANCE |
| B1D83-00 | SEAT REAR VERTICAL MOTOR CONTROL CIRCUIT PERFORMANCE |
| B1D87-00 | SEAT BACKREST MOTOR CONTROL - CIRCUIT PERFORMANCE |
| B1D9B-54 | SEAT HORIZONTAL FRONT STOP NOT LEARNED-MISSING CALIBRATION |
| B1ED1-11 | ADJUSTABLE PEDAL SENSOR - CIRCUIT SHORT TO GROUND |
| B1ED1-12 | ADJUSTABLE PEDAL SENSOR-CIRCUIT SHORT TO BATTERY |
| B210A-84 | SYSTEM VOLTAGE LOW - SIGNAL BELOW ALLOWABLE RANGE |
| B210B-85 | SYSTEM VOLTAGE HIGH - SIGNAL ABOVE ALLOWABLE RANGE |
| B210D-21 | BATTERY VOLTAGE LOW - SIGNAL AMPLITUDE < MINIMUM |
| B210E-22 | BATTERY VOLTAGE HIGH - SIGNAL AMPLITUDE > MAXIMUM |
| B221C-42 | (MSM) MEMORY SEAT MODULE INTERNAL-GENERAL MEMORY FAILURE |
| U0011-00 | CAN INTERIOR BUS OFF PERFORMANCE |
| U0013-00 | CAN INTERIOR BUS (+) CIRCUIT LOW |
| U0014-00 | CAN INTERIOR BUS (+) CIRCUIT HIGH |
| U0016-00 | CAN INTERIOR BUS (-) CIRCUIT LOW |
| U0017-00 | CAN INTERIOR BUS (-) CIRCUIT HIGH |
| U0140-00 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U0199-00 | LOST COMMUNICATION WITH DRIVER DOOR MODULE |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.