Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2013JOURNEY CREW, AWDREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXMODULE, PASSENGER DOOR (PDM), (DMFL/R)
2013 Dodge and Ram Journey Crew, AWD
Module, Passenger Door (PDM), (DMFL/R)
2013 Dodge and Ram Journey Crew, AWDSECTION Module, Passenger Door (PDM), (DMFL/R)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| B1751 | COURTESY LAMP CONTROL-CIRCUIT SHORT TO GROUND |
| B1751-15 | COURTESY LAMP CONTROL-CIRCUIT SHORT TO BATTERY OR OPEN |
| B18BA-11 | WINDOW CONTROL-CIRCUIT SHORT TO GROUND |
| B18BA-12 | WINDOW CONTROL-CIRCUIT SHORT TO BATTERY |
| B18BA-13 | WINDOW CONTROL-CIRCUIT OPEN |
| B18E6-2A | WINDOW SWITCH - STUCK |
| B1DD0-11 | MIRROR HEATER CONTROL-CIRCUIT SHORT TO GROUND |
| B1DD0-15 | MIRROR HEATER CONTROL-CIRCUIT SHORT TO BATTERY OR OPEN |
| B1F02-11 | MIRROR VERTICAL MOTOR CONTROL-CIRCUIT SHORT TO GROUND |
| B1F02-12 | MIRROR VERTICAL MOTOR CONTROL-CIRCUIT SHORT TO BATTERY |
| B1F02-13 | MIRROR VERTICAL MOTOR CONTROL-CIRCUIT OPEN |
| B1F03-11 | MIRROR HORIZONTAL MOTOR CONTROL-CIRCUIT SHORT TO GROUND |
| B1F03-12 | MIRROR HORIZONTAL MOTOR CONTROL-CIRCUIT SHORT TO BATTERY |
| B1F03-13 | MIRROR HORIZONTAL MOTOR CONTROL-CIRCUIT OPEN |
| B1F04-11 | MIRROR FOLD CONTROL-CIRCUIT SHORT TO GROUND |
| B1F04-15 | MIRROR FOLD CONTROL-CIRCUIT SHORT TO BATTERY OR OPEN |
| B210C-16 | BATTERY VOLTAGE INPUT-CIRCUIT VOLTAGE BELOW THRESHOLD |
| B210C-17 | BATTERY VOLTAGE INPUT-CIRCUIT VOLTAGE ABOVE THRESHOLD |
| B21DD-84 | SYSTEM VOLTAGE-SIGNAL BELOW ALLOWABLE RANGE |
| B21DD-85 | SYSTEM VOLTAGE-SIGNAL ABOVE ALLOWABLE RANGE |
| B224F-54 | DOOR MODULE INTERNAL-MISSING CALIBRATION |
| B224F-96 | DOOR MODULE INTERNAL-COMPONENT INTERNAL FAILURE |
| B25AF-2A | DOOR LOCK/UNLOCK SWITCH-STUCK |
| B25B0-31 | WINDOW POSITION SENSOR-NO SIGNAL |
| B25B1-11 | WINDOW POSITION SENSOR POWER SUPPLY-CIRCUIT SHORT TO GROUND |
| B285E-11 | WINDOW SWITCH BACKLIGHTING-CIRCUIT SHORT TO GROUND |
| B2860-11 | DOOR AMBIENT LIGHT CONTROL-CIRCUIT SHORT TO GROUND |
| B2860-15 | DOOR AMBIENT LIGHT CONTROL-CIRCUIT SHORT TO BATTERY OR OPEN |
| U0010-00 | CAN INTERIOR BUS |
| U0018-00 | CAN INTERIOR BUS (-) SHORTED TO BUS (+) |
| U0140-00 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U0164-00 | LOST COMMUNICATION WITH HVAC CONTROL MODULE |
| U0199-00 | LOST COMMUNICATION WITH DRIVER DOOR MODULE |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.