Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2013JOURNEY CREW, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 35 (HEATED SEAT MODULE (HSM) - ELECTRICAL DIAGNOSTICS)DTC TROUBLESHOOTINGU0168-00-LOST COMMUNICATION WITH INTRUSION TRANSCEIVER MODULEPOSSIBLE CAUSES
2013 Dodge and Ram Journey Crew, AWD
Possible Causes
2013 Dodge and Ram Journey Crew, AWDSECTION Possible Causes
WARNING: This page is about a different car, the 2012 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
| Possible Causes |
|---|
| CAN BUS (+) CIRCUIT SHORTED TO VOLTAGE |
| CAN BUS (-) CIRCUIT SHORTED TO GROUND |
| DTCS RELATED TO BATTERY VOLTAGE, IGNITION, OR VIN MESSAGES |
| BODY CONTROL MODULE (BCM) NOT CONFIGURED CORRECTLY |
| INTRUSION TRANSCEIVER MODULE POWER AND GROUND |
| INTRUSION TRANSCEIVER MODULE |
| MODULE THAT SET THE DTC |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.