Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Adding Additional Coolant
2.0L Diesel - Coolant will normally be in the pressure chamber side of the coolant bottle. The overflow chamber should normally be empty. If additional coolant is to be added, use the indicators on the bottle as a guide.
3.6L/2.4L - When additional coolant is needed, it should be added to the coolant recovery container. With the engine cold, add enough coolant to set the level between the add and full indicators on the bottle.
For the proper type of coolant. Refer to CAPACITIES AND RECOMMENDED FLUIDS, DESCRIPTION .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.