Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2013JOURNEY CREW, AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESCOMMUNICATION - NON-DTC BASED DIAGNOSTICS
2013 Dodge and Ram Journey Crew, AWD
Communication - Non-DTC Based Diagnostics
2013 Dodge and Ram Journey Crew, AWDSECTION Communication - Non-DTC Based Diagnostics
- Diagnosis And Testing
- Can C Bus No Response
- No Response From Abs (Antilock Brake System Module)
- No Response From Amp (Amplifier)
- No Response From BCM (Body Control Module)
- No Response From EPPM (Electronic Pedestrian Protection Module)
- No Response From DDM (Driver Door Module)
- No Response From DTCM (Drivetrain Control Module)
- No Response From HFM (Hands Free Module)
- No Response From HSM (Heated Seat Module)
- No Response From HVAC (A/C Heater Control Module)
- No Response From Ics (Integrated Center Stack)
- No Response From IPC (Instrument Panel Cluster)
- No Response From ITM (Intrusion Transceiver Module)
- No Response From Orc (Occupant Restraint Controller)
- No Response From Pcm (Powertrain Control Module) (Diesel)
- No Response From Pcm (Powertrain Control Module) - Gas
- No Response From PDM (Passenger Door Module)
- No Response From PTS (Park Assist Module)
- No Response From RFH (Radio Frequency Hub) Module
- No Response From SCCM (Steering Column Control Module)
- No Response From TCM (Transmission Control Module) (Diesel)
- No Response From TCM (Transmission Control Module) - Gas
- No Response From TGW (Telematics Gateway) Module
- No Response From TPM (Tire Pressure Monitoring) Module
- No Response From VES3 (Video Screen Module)
- Stored Lost Communication DTCS
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.