Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Cooling System Overheating: Notes
2013 Dodge and Ram Dart GTSECTION Notes
Establish what driving conditions caused the complaint. Abnormal loads on the cooling system such as the following may be the cause:
- Prolonged idle
- Very high ambient temperature
- Slow traffic
- Traffic jams
- High speed or steep grades
- Debris on front of the grill or the cooling module that is restricting airflow
Driving techniques that avoid overheating are:
- Idle with A/C off when temperature gauge is at end of normal range.
- Increasing engine speed up to 2000 RPM with transmission in park or neutral for more airflow is recommended.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.