Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2011JOURNEY R/T, AWDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSENGINE COOLING SYSTEMENGINEFAN, COOLINGINSTALLATIONGAS
2011 Dodge and Ram Journey R/T, AWD
Fan, Cooling: Installation: Gas
2011 Dodge and Ram Journey R/T, AWDSECTION Gas
- Position radiator fan into core support frame (2).
- Install mounting bolts (4). Tighten bolts to 35 N.m (25 ft. lbs.).
- Install the wiring harness to the lower area of the fan frame.
- Connect radiator fan electrical connector.
- Install windshield washer reservoir (1).
- Install the air intake assembly.
- Connect negative battery cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.