Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2011JOURNEY R/T, AWDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSENGINE COOLING SYSTEMENGINEBOTTLE, COOLANT RECOVERYINSTALLATIONGAS ENGINE
2011 Dodge and Ram Journey R/T, AWD
Gas Engine
2011 Dodge and Ram Journey R/T, AWDSECTION Gas Engine
- Install the lower supply hose (5).
- Position the coolant recovery bottle (1) into vehicle.
- Install the coolant recovery bottle mounting bolts (2). Tighten the mounting bolt to 8N.m (70 in. lbs.).
- Install the return hose (3) at the upper coolant supply fitting.
- Fill coolant recovery container to proper level. Refer to STANDARD PROCEDURE .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.