Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2011GRAND CARAVAN V6-3.6LREPAIR AND DIAGNOSISBODY AND FRAMESEATSSERVICE AND REPAIRREMOVAL AND REPLACEMENTSECOND AND THIRD ROW BENCH SEATSSEAT BACK HINGE COVER - INSTALLATION
2011 Dodge and Ram Grand Caravan V6-3.6L
Seat Back Hinge Cover - Installation
2011 Dodge and Ram Grand Caravan V6-3.6LSECTION Seat Back Hinge Cover - Installation
INSTALLATION
1. Position the lower hinge cover (2) to the seat back hinge and install the retaining screws (3). Tighten the screws to 2.3 Nm (20 in. lbs.).
2. Position the upper hinge cover (4) to the seat back hinge and install the retaining screws (1). Tighten the screws to 2.3 Nm (20 in. lbs.).
3. Install the seat into the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.