Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2011CHALLENGER SRT-8 V8-6.4LREPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSNORMAL SERVICE48000 MI OR 76800 KM
2011 Dodge and Ram Challenger SRT-8 V8-6.4L
48000 MI or 76800 KM
2011 Dodge and Ram Challenger SRT-8 V8-6.4LSECTION 48000 MI or 76800 KM
Inspect
Tie Rod End
Tie Rod Boot
Suspension
Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary.
Fluid - M/T
Inspect the manual transmission fluid (if equipped), add as necessary.
Exhaust System
Constant Velocity Joint
Brakes and Traction Control
Inspect the brake linings, replace if necessary.
Brake Hose/Line
Inspect the brake hoses and lines.
Replace
Oil Filter, Engine
Engine Oil
Rotate
Tires
Tie Rod End
Tie Rod Boot
Suspension
Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play; replace if necessary.
Fluid - M/T
Inspect the manual transmission fluid (if equipped), add as necessary.
Exhaust System
Constant Velocity Joint
Brakes and Traction Control
Inspect the brake linings, replace if necessary.
Brake Hose/Line
Inspect the brake hoses and lines.
Replace
Oil Filter, Engine
Engine Oil
Rotate
Tires
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.