Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Maintenance Service Reminder Reset Procedure
2011 Dodge and Ram Caliber ExpressSECTION Maintenance Service Reminder Reset Procedure
When a service as been performed, the ASSYST maintenance computer can be reset as follow:
- Turn the key to position 2 in the ignition lock and immediately press the "mi" ("km") button twice and hold. Keep the "mi" ("km") button pressed.
- Within 10 seconds, return the key to position 0 in the ignition lock.
- Continue to press and hold the "mi" ("km") button. Turn the key to position 2 in the ignition lock. Keep the "mi" ("km") button pressed.
- The maintenance indicator with the current remaining time/distance is shown.
- After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time/distance.
- Release the "mi" ("km") button.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.