Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2009DURANGO 4WD V8-5.7L HYBRIDREPAIR AND DIAGNOSISBODY AND FRAMEBUMPERFRONT BUMPERSERVICE AND REPAIRFRONT BUMPER - INSTALLATION
2009 Dodge and Ram Durango 4WD V8-5.7L Hybrid
Front Bumper - Installation
2009 Dodge and Ram Durango 4WD V8-5.7L HybridSECTION Front Bumper - Installation
INSTALLATION
1. Install the bumper support (1) and install the nuts (2).
2. Tighten the nuts to 109 Nm (80 ft. lbs.).
3. Install the front bumper. Front Bumper Fascia - Installation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.