SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2009AVENGER V6-2.7L FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSENGINE TORQUE SPECIFICATIONS
2009 Dodge and Ram Avenger V6-2.7L Flex Fuel

Engine Torque Specifications

2009 Dodge and Ram Avenger V6-2.7L Flex FuelSECTION Engine Torque Specifications





TORQUE






2.7L, EER

CYLINDER HEAD





Tighten bolts in sequence shown, using the following steps and torque values:
Step 1: Bolts 1-8 48 Nm (35 ft. lbs.)
Step 2: Bolts 1-8 75 Nm (55 ft. lbs.)
Step 3: Bolts 1-8 75 Nm (55 ft. lbs.)
Step 4: Bolts 1-8 +90° Turn

CAUTION: Do not use a torque wrench for this step.

Step 5: Bolts 9-11 28 Nm (250 in. lbs.)

HEAD BOLT REUSE/REPLACE










The cylinder head bolts must be examined BEFORE reuse. If the threads are necked down the bolts must be replaced

INTAKE MANIFOLD





Lower





Upper

Camshaft Bearing Cap






MAIN BEARING CAP

NOTE: The main bearing cap bolts must be tightened in the proper sequence. First the inner main cap bolts, secondly the windage tray bolts, and lastly the main cap tie (horizontal) bolts.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.