Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2009AVENGER V6-2.7L FLEX FUELREPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - POWERTRAIN MANAGEMENTRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSENGINE CONTROL MODULESERVICE AND REPAIRPOWERTRAIN CONTROL MODULE - INSTALLATION
2009 Dodge and Ram Avenger V6-2.7L Flex Fuel
Powertrain Control Module - Installation
2009 Dodge and Ram Avenger V6-2.7L Flex FuelSECTION Powertrain Control Module - Installation
2.7 3.5L (NGC)
1. Install the Powertrain Control Module (PCM) (2) to bracket (1). Tighten bolts (3) to 5 Nm (45 in. lbs.).
2. Install the PCM and bracket (4) to vehicle.
3. Install bolt (3) to lower shock tower fastener and tighten to 9 Nm (80 in. lbs.).
4. Install nut (1) to upper shock tower stud and tighten to 9 Nm (80 in. lbs.).
5. Connect the electrical connectors (2) to PCM.
6. Install Air Cleaner Housing, Air Cleaner Body - Installation.
7. Connect negative battery cable and tighten to 16.5 Nm (145 in. lbs.).
8. Reprogram radio stations and time.
9. Program the PCM, Testing and Inspection.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.