Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2006MAGNUM V6-2.7L VIN TREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON, ENGINE
2006 Dodge and Ram Magnum V6-2.7L VIN T
Piston, Engine
2006 Dodge and Ram Magnum V6-2.7L VIN TSECTION Piston, Engine
PISTONS
Material Aluminum Alloy
Piston Diameter 85.983 mm (±0.019 3.3851 inch) ±0.0017
Clearance at Size Location 0.0096 to +0.0436 mm ( - 0.0003 to +0.0016 inch)
Piston Weight 316-326 grams 11.1466-11.4994 oz.
Piston Ring Groove Diameter-No.1 77.8-78 mm (3.063-3.070 inch)
Piston Ring Groove Diameter-No.2 75.9-76.1 mm (2.988-2.996 inch)
Piston Ring Groove Diameter-No.3 76.5-76.7 mm (3.011-3.019 inch)
PISTON PINS
Type Full Floating
Pin Diameter 21.997-22.000 mm (0.8661-0.8662 inch)
Clearance in Piston 0.005-0.013 mm (0.0002-0.0005 inch)
Clearance in Rod 0.007-0.018 mm (0.0003-0.0008 inch)
Material Aluminum Alloy
Piston Diameter 85.983 mm (±0.019 3.3851 inch) ±0.0017
Clearance at Size Location 0.0096 to +0.0436 mm ( - 0.0003 to +0.0016 inch)
Piston Weight 316-326 grams 11.1466-11.4994 oz.
Piston Ring Groove Diameter-No.1 77.8-78 mm (3.063-3.070 inch)
Piston Ring Groove Diameter-No.2 75.9-76.1 mm (2.988-2.996 inch)
Piston Ring Groove Diameter-No.3 76.5-76.7 mm (3.011-3.019 inch)
PISTON PINS
Type Full Floating
Pin Diameter 21.997-22.000 mm (0.8661-0.8662 inch)
Clearance in Piston 0.005-0.013 mm (0.0002-0.0005 inch)
Clearance in Rod 0.007-0.018 mm (0.0003-0.0008 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.