SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2006CARAVAN SE, 3.3 EREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTBODY INTERIORBODY DIAGNOSTIC PROCEDURES - INTRODUCTIONSYSTEM DESCRIPTION AND FUNCTIONAL OPERATIONAIRBAG SYSTEM/OCCUPANT RESTRAINT CONTROLLER SYSTEM AND OCCUPANT CLASSIFICATION SYSTEMDRIVER KNEE BLOCKER AIRBAG
2006 Dodge and Ram Caravan SE, 3.3 E

Driver Knee Blocker Airbag

2006 Dodge and Ram Caravan SE, 3.3 ESECTION Driver Knee Blocker Airbag

The most visible part of the Driver Knee Blocker Airbag is the knee blocker trim cover. The knee blocker trim cover and airbag are mounted directly to the instrument panel structure below the steering column. When supplied with the proper electrical signal, the inflator discharges the gas directly into the airbag. The airbag cannot be repaired, and must be replaced if deployed or in any way damaged.

WARNING: DO NOT ATTEMPT TO MODIFY ANY PART OF YOUR ADVANCED AIRBAG SYSTEM. THE AIRBAG MAY INFLATE ACCIDENTALLY OR MAY NOT FUNCTION PROPERLY IF MODIFICATIONS ARE MADE. TAKE YOUR VEHICLE TO AN AUTHORIZED DEALER FOR ANY ADVANCED AIRBAG SYSTEM SERVICE. IF YOU'RE SEAT INCLUDING YOUR TRIM COVER AND CUSHION NEEDS TO BE SERVICED IN ANY WAY (INCLUDING REMOVAL OR LOOSENING/TIGHTENING OF SEAT ATTACHMENT BOLTS), TAKE THE VEHICLE TO YOUR AUTHORIZED DEALER. ONLY MANUFACTURER APPROVED SEAT ACCESSORIES MAY BE USED. CONTACT YOUR AUTHORIZED DEALER IF IT IS NECESSARY TO MODIFY AN ADVANCED AIRBAG SYSTEM FOR PERSONS WITH DISABILITIES.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.