Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2005NEON SE, STANDARDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESELECTRONIC CONTROL MODULESPOWERTRAIN CONTROL MODULEINSTALLATIONINSTALLATION - 2.0L
2005 Dodge and Ram Neon SE, Standard
Installation - 2.0L
2005 Dodge and Ram Neon SE, StandardSECTION Installation - 2.0L
- Install the assembly, PCM and bracket.
- Loose install the mounting nut.
- Install the mounting bolts to the bottom of the PCM bracket. See Figure.
- Tighten the mounting nut, tighten to
- Install the wiring harness clip to the PCM bracket. See Figure.NOTE: The electrical connector for the PCM are COLOR Coded.
- Connect the electrical connectors and lock at the PCM. See Figure.
- Install the air cleaner box, refer to AIR CLEANER HOUSING (2.0) or AIR CLEANER HOUSING (2.4) for more information. See Figure.
- Connect the negative battery cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.