Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2005MAGNUM R/T, AWDREPAIR AND DIAGNOSISELECTRICALGAUGESOVERHEAD CONSOLE (SERVICE INFORMATION)SENSOR-AMBIENT AIR TEMPERATUREINSTALLATION
2005 Dodge and Ram Magnum R/T, AWD
Sensor-Ambient Air Temperature: Installation
2005 Dodge and Ram Magnum R/T, AWDSECTION Installation
- Position the ambient temperature sensor in the vehicle.
- Install the fastener that secures the ambient temperature sensor to the front fascia.
- Connect the wire harness connector (1) to the ambient temperature sensor (2).
- Install the belly pan, (Refer to BODY/EXTERIOR/BELLY PAN - INSTALLATION) .
- Connect the battery negative cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.