Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2000NEON ES, AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEBODY, CAB CONTROL SYSTEMSBODY CONTROL MODULESPROGRAMMINGREMOTE KEYLESS ENTRY (RKE) TRANSMITTERPROGRAMMING RKE TRANSMITTER WITHOUT SCAN TOOL
2000 Dodge and Ram Neon ES, Automatic
Programming RKE Transmitter Without Scan Tool
2000 Dodge and Ram Neon ES, AutomaticSECTION Programming RKE Transmitter Without Scan Tool
- Turn ignition ON position. Press and hold RKE transmitter UNLOCK button for 4-10 seconds. While pressing UNLOCK button, press PANIC button. A chime will sound to indicate RKE has entered programming mode.
- Press any button on transmitter(s) to be programmed, including any previously programmed transmitter. A chime will sound each time a transmitter has been programmed. To exit programming mode, turn ignition OFF.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.