Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2000INTREPID R/TREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSOVERHAUL - 42LE AUTOMATIC TRANSMISSIONTRANSAXLE SPECIFICATIONS
2000 Dodge and Ram Intrepid R/T
Transaxle Specifications
2000 Dodge and Ram Intrepid R/TSECTION Transaxle Specifications
TRANSAXLE SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Clutch Clearances | ||
| Low-Reverse Clutch | .035-.060" (.89-1.52 mm) | |
| Overdrive Clutch | .042-.128" (1.07-3.25 mm) | |
| Reverse Clutch | .035-.054" (.89-1.37 mm) | |
| Underdrive Clutch | .037-.059" (.94-1.50 mm) | |
| 2-4 Clutch | .030-1.04" (.76-2.64 mm) | |
| Differential Rotating Torque With NEW Bearings ONLY | 19-23 INCH Lbs. (2.1-2.6 N.m) | |
| Input Shaft End Play | .005-.025" (.13-.64 mm) | |
| Oil Pump Clearances | ||
| Inner & Outer Gear Side Clearance | .0008-.0018" (.020-.046 mm) | |
| Outer Gear-To-Pocket Clearance | .0018-.0056" (.046-.142 mm) | |
| Output Shaft Rotating Torque For Bearing Preload | 1-8 INCH Lbs. (.1-.9 N.m) | |
| Ring Gear Backlash | .006-.009" (.15-.23 mm) | |
| Transfer Shaft Rotating Torque For Bearing Preload | 5-12 INCH Lbs. (.6-1.4 N.m) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.